This accessory boosts signal strength and allows you to recharge your Combustion Predictive Thermometer (CPT) even when you don’t have access to USB power. Perfect for smoking, grilling or other outdoor cooking - the WiFi Booster helps you overcome r

<section id="isPasted"><div data-cascade><h3 id="more-power"><span style="font-size: 16px; color: rgb(216, 44, 44);">More power</span></h3><p>This accessory boosts signal strength and allows you to recharge your Combustion Predictive Thermometer (CPT) even when you don&#x2019;t have access to USB power.</p><p>Perfect for smoking, grilling or other outdoor cooking - the WiFi Booster helps you overcome radio obstacles like thick-walled metal smokers and grills. Use it as a WiFi bridge or a Bluetooth relay station, while you control settings and observe temps from far away with the Combustion Display or App.</p><h3 id="direct-to-wifi"><span style="font-size: 16px; color: rgb(216, 44, 44);">Direct-to-WiFi</span></h3><p>The WiFi Booster&#xA0;<strong>connects directly to any WiFi network</strong>, allowing you to view your live cook data from wherever there is internet! Connect your app to MeatNet&#x2122; Cloud and the world is your cookspace.&#xA0;</p><p>You can also &#x201C;daisy-chain&#x201D; other MeatNet devices (like the Display or other Boosters) as relay &#x201C;hops&#x201D; for a ridiculously long Bluetooth connection.</p><h3 id="cordless-recharge"><span style="font-size: 16px; color: rgb(216, 44, 44);">Cordless recharge</span></h3><p>The Booster&#x2019;s onboard battery has enough juice to recharge your Predictive Thermometer fully up to 16 times. When stored in the Booster, a Predictive Thermometer will stay fully charged and ready to go for up to 9 months.</p><p><strong>Stay ready so you don&#x2019;t have to get ready!</strong></p><p><br></p></div></section><section><div data-cascade><h2 id="meatnet-cloud"><span style="font-size: 18px;"><strong><span style="color: rgb(216, 44, 44);">MeatNet&#x2122; Cloud</span></strong></span></h2><p><strong><span style="color: rgb(216, 44, 44);">The&#xA0;</span></strong><span style="color: rgb(216, 44, 44);"><strong>Wifi Booster</strong><strong>&#xA0;now includes&#xA0;</strong></span><strong><span style="color: rgb(216, 44, 44);">MeatNet Cloud</span></strong></p><p>Sync your local MeatNet&#x2122; to the cloud using the Combustion App and you can view your cooks - live - from wherever you are.</p><p><strong><span style="color: rgb(216, 44, 44);">Watch your cook from anywhere</span></strong></p><p>This is great for long low+slow cooks. But it&#x2019;s also handy for shorter cooking sessions. By leveraging your home WiFi you can forward cook data to hard-to-reach places.</p><u><a href="https://combustion.inc/pages/features/meat-net-cloud-watch-your-cook-from-anywhere" style=" text-decoration: none;"><span style="color: rgb(216, 44, 44);">More about MeatNet Cloud&#xA0;</span></a></u></div></section>

WIFI Booster

<h3 id><span style="font-size: 16px;"><br></span></h3><h3 id="isPasted"><span style="font-size: 16px; color: rgb(216, 44, 44);">Wireless</span></h3><table style="width: 100%;"><tbody><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">WIFI</span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">802.11 b/g/n (2.4 GHz)&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">MeatNet Enabled&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">Yes&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">BLE range - Unobstructed&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">330ft+ (100m+) &#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">BLE range - Obstructed&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">50ft (15m)&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">BLE Spec&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">BLE 5.4 PHY&#xA0;<br></span></td></tr></tbody></table><p><span style="font-size: 16px;"><br></span></p><h3 id="isPasted"><span style="font-size: 16px; color: rgb(216, 44, 44);">Power</span></h3><table style="width: 100%;"><tbody><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">Battery Life - standby with CPT&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">285 days (9.5 months)&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">Battery Life - connected/WiFi&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">54 hr&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">Recharge capacity - CPT&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">16 full CPT recharges&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">Time-to-charge - Booster&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">60 min&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">Charging port&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">USB-C&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">Time-to-recharge CPT fully&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">20 min&#xA0;<br></span></td></tr><tr><td style="width: 50.0000%;"><span style="font-size: 16px;">Battery type&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">Lithium Ion&#xA0;<br></span></td></tr></tbody></table><p><span style="font-size: 16px;"><br></span></p><h3 id="isPasted"><span style="font-size: 16px; color: rgb(216, 44, 44);">Other</span></h3><table style="width: 100%;"><tbody><tr><td style="width: 50%; vertical-align: middle;"><span style="font-size: 16px;">Temperature tolerance - Booster&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">-4 to 122&#xB0;F (-20 to 50&#xB0;C)&#xA0;<br></span></td></tr><tr><td style="width: 50%; vertical-align: middle;"><span style="font-size: 16px;">Exterior Dimensions&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">165.8mm x 15.8mm x 14.4mm&#xA0;<br></span></td></tr><tr><td style="width: 50%; vertical-align: middle;"><span style="font-size: 16px;">Certifications&#xA0;<br></span></td><td style="width: 50.0000%;"><span style="font-size: 16px;">FCC, Bluetooth SIG, Food Contact Declaration, CE-EMC, CE-Red, IC-ID + ICED, REACH, ROHS&#xA0;<br></span></td></tr></tbody></table><p><br></p>

Specs and Tech: WIFI Booster

Power up!. Stay ready so you don’t have to get ready. This Combustion Booster extends Bluetooth range and allows you to recharge your Predictive Thermometer even when you don’t have access to USB power. Perfect for smoking, grilling, or other outdoor

<p style="line-height: 1;"><br></p><p id="isPasted" style="line-height: 1;"><strong><span style="font-size: 24px; color: rgb(216, 44, 44);">Power up!</span></strong></p><p>Stay ready so you don&#x2019;t have to get ready. This Combustion Booster extends Bluetooth range and allows you to recharge your Predictive Thermometer even when you don&#x2019;t have access to USB power.</p><p>Perfect for smoking, grilling, or other outdoor cooking - the Booster helps you overcome radio obstacles like thick-walled metal smokers and grills.</p><p><span style="font-size: 14px;"><strong>Featuring <a href="https://combustion.inc/blogs/news/cook-food-that-is-safe-and-still-delicious-using-safecook-from-combustion-inc" id="isPasted" target="_blank" title="How Combustion&#x2019;s SafeCook&#x2122; determines when your food is safe"><u><span style="color: rgb(216, 44, 44);">SafeCook&#x2122;</span></u></a> (new) and <a href="https://combustion.inc/blogs/news/meatnet-cloud-monitor-ongoing-cooks-from-anywhere" target="_blank" title="MeatNet Cloud: Monitor ongoing cooks from anywhere"><u><span style="color: rgb(216, 44, 44);">MeatNet&#x2122; Cloud</span></u></a> (new)</strong></span></p><p><span style="font-size: 14px;">&#xA0;</span></p><h2 id="do-this-first"><strong><span style="color: rgb(216, 44, 44);">Do this first!</span></strong></h2><h3 id="charge-your-tools"><span style="font-size: 18px;">Charge your tools</span></h3><ul><li style="font-size: 16px;">Charge the Booster (60 min).&#xA0;</li><li style="font-size: 16px;">NOTE: Don&#x2019;t insert the thermometer yet!</li></ul><p>&#x26A0;&#xFE0F; Putting a thermometer into the Booster shuts the radio off! Removing it turns the radio on.</p><p>&#x26A0;&#xFE0F; NOTE: use standard 5v USB ports/power supplies only.</p><h3 id="update-firmware"><span style="font-size: 18px;">Update firmware</span></h3><ul><li style="font-size: 16px;">Download the <strong>Combustion Inc App</strong> from the <a href="https://apps.apple.com/us/app/combustion-inc/id1658858290"><span style="color: rgb(216, 44, 44);">App Store</span>&#xA0;</a>for iOS or <a href="https://play.google.com/store/apps/details?id=inc.combustion.app"><span style="color: rgb(216, 44, 44);">Google Play</span></a> for Android.&#xA0;</li><li style="font-size: 16px;">Unplug the Booster from the USB</li><li style="font-size: 16px;">Don&#x2019;t insert a thermometer yet!</li><li style="font-size: 16px;">Tap the Combustion logo on the app</li><li style="font-size: 16px;">Tap <strong>update</strong></li><li style="font-size: 16px;">Recharge the Booster after updating</li><li style="font-size: 16px;">Note: please do not update more than one Booster (or other Combustion tool) at the same time. Leave the other ones powered off (or on standby) while you update. It doesn&apos;t take long!</li></ul><p>Power off the Booster by holding the button (1 sec).</p><h3 id="link-your-thermometer"><span style="font-size: 18px;">Link your thermometer</span></h3><ul><li style="font-size: 16px;">Unplug the Booster from the USB</li><li style="font-size: 16px;">The light will flash white 3 times in a row to show it&#x2019;s searching (this sequence repeats)</li><li style="font-size: 16px;">Hold a (fully charged) thermometer near the Booster&#xA0;</li><li style="font-size: 16px;">A single white blink indicates the link has been established (it will blink every 5 seconds)</li></ul><p><br></p><p><img data-fr-image-pasted="true" src="https://combustion.inc/cdn/shop/files/getting-started-meat-cuddle-a.png?v=1702496991&amp;width=3200" style="width: 692px;" class="fr-fic fr-dib"><br></p><h2 id="isPasted"><strong><span style="color: rgb(216, 44, 44);">Link all tools (multi-node MeatNet&#x2122;) - Cuddle Pile!</span></strong></h2><p>To share signals correctly, all of the Combustion Tools involved must be linked.</p><p>Start by updating the firmware on all devices* (if you haven&apos;t yet).</p><p>Then do this:</p><ul><li style="font-size: 16px;">Put Thermometers in Boosters (this turns the Booster radio off) and turn off Display (hold start/stop)</li><li style="font-size: 16px;">Put all devices within a couple of inches of each other</li><li style="font-size: 16px;">Remove Thermometers from Boosters and turn on Display, and set Thermometers in the pile of devices</li><li style="font-size: 16px;">Let all devices sit for 1-2 minutes</li><li style="font-size: 16px;">That&apos;s it! They&apos;re all linked together and will relay signals from all linked Thermometers</li><li style="font-size: 16px;">Each Booster can be linked to up to four Thermometers</li></ul><p>&#x26A0;&#xFE0F; Yes, this works with multiple Boosters, with or without a Display.</p><p><br></p><p><span style="font-size: 14px;"><em>[Related searches: Booster linking, Cuddle Pile, Cuddle Puddle]</em></span></p><p><br></p><p id="isPasted"><br></p><p><br></p><p><br></p>

Setup Guide: Range-Extending Booster

If the Booster is plugged in to USB power, the amber light indicates the onboard battery is charging and/or the thermometer is charging. (With older firmware, the light may blink amber. If it does, please update your firmware.). In portable charger m

<p><span style="font-size: 16px;"><br></span></p><table class="fr-alternate-rows" style="width: 100%;"><tbody><tr><td style="width: 50%; background-color: rgb(252, 205, 73);"><div style="text-align: center;"><span style="font-size: 16px;"><strong>Light</strong>&#xA0;<br></span></div></td><td style="width: 50%; background-color: rgb(252, 205, 73);"><div style="text-align: center;"><span style="font-size: 16px;"><strong>What it means&#xA0;</strong><br></span></div></td></tr><tr><td style="width: 50%; vertical-align: middle;"><div style="margin-left: 20px;"><span style="font-size: 16px;"><strong>Amber = Charging&#xA0;</strong><br></span></div></td><td style="width: 50%; vertical-align: middle;"><p id="isPasted"><span style="font-size: 16px;">If the Booster is plugged in to USB power, the amber light indicates the onboard battery is charging and/or the thermometer is charging. (With older firmware, the light may blink amber. If it does, please update your firmware.)</span></p><p><span style="font-size: 16px;">In portable charger mode, press the button (light). An amber light response indicates the thermometer is still charging.</span></p><p><span style="font-size: 16px;">The indicator will turn off after 5 seconds.</span></p></td></tr><tr><td style="width: 50%; vertical-align: middle;"><div style="margin-left: 20px;"><span style="font-size: 16px;"><strong>Green = Charged!&#xA0;</strong><br></span></div></td><td style="width: 50%; vertical-align: middle;"><p id="isPasted"><span style="font-size: 16px;">When plugged in, that means the Booster is charged and the Predictive Thermometer (if it&apos;s in there) is also fully charged.</span></p><p><span style="font-size: 16px;">In portable charger mode, press the button (light). A green light response indicates the thermometer is fully charged.</span></p><p><span style="font-size: 16px;">The indicator will turn off after 5 seconds.</span></p></td></tr><tr><td style="width: 50%; vertical-align: middle;"><div style="margin-left: 20px;"><span style="font-size: 16px;"><strong>Blinking White x3 = Searching&#xA0;</strong><br></span></div></td><td style="width: 50%; vertical-align: middle;"><p id="isPasted"><span style="font-size: 16px;">A repeated pattern of 3 white blinks indicates that the Booster is searching for linked tools within range.</span></p><p><span style="font-size: 16px;">It will only connect to Combustion tools that have been linked already.</span></p><p><span style="font-size: 16px;">Follow the linking steps above.</span></p></td></tr><tr><td style="width: 50%; vertical-align: middle;"><div style="margin-left: 20px;"><span style="font-size: 16px;"><strong>Single White Blink = Connected/Repeating</strong>&#xA0;<br></span></div></td><td style="width: 50%; vertical-align: middle;"><p id="isPasted"><span style="font-size: 16px;">When the Booster is connected to a Predictive Thermometer (either directly or via another Booster/Display), it will repeat and rebroadcast the signal.</span></p><p><span style="font-size: 16px;">A single white blink indicates this connection is live! The blink will repeat every 5 seconds.</span></p></td></tr><tr><td style="width: 50%; vertical-align: middle;"><div style="margin-left: 20px;"><span style="font-size: 16px;"><strong>Quick Red Blink = Low Battery&#xA0;</strong><br></span></div></td><td style="width: 50%; vertical-align: middle;"><span style="font-size: 16px;">When the onboard battery is low, the Booster will repeat a very quick red blink. Time to recharge it!&#xA0;<br></span></td></tr><tr><td style="width: 50%; vertical-align: middle;"><div style="margin-left: 20px;"><span style="font-size: 16px;"><strong>Quick Blue Blink = Connected to WiFi&#xA0;</strong><br></span></div></td><td style="width: 50%; vertical-align: middle;"><span style="font-size: 16px;">(WiFi Boosters only) With an active WiFi connection, you&apos;ll see a brief blue flash confirming that.&#xA0;<br></span></td></tr><tr><td style="width: 50%; vertical-align: middle;"><div style="margin-left: 20px;"><span style="font-size: 16px;"><strong>Overlapping Patterns?&#xA0;</strong><br></span></div></td><td style="width: 50%; vertical-align: middle;"><p id="isPasted"><span style="font-size: 16px;">It&apos;s possible that more than one light pattern will be triggered at a time.</span></p><p><span style="font-size: 16px;">For instance, a Booster which is recharging itself (blinking amber) may also be repeating (single white blink).</span></p><p><span style="font-size: 16px;">If you see a confusing light pattern, it&apos;s most likely two simple patterns that are overlapping.</span></p></td></tr></tbody></table><p><br></p><p><span style="font-size: 10px;"><em>(Related keywords: Booster LEDs, Booster LED lights, Booster behavior)</em></span></p>

Booster Lights (LED)

Know your Booster's charging and battery behavior with the table below:. For a full charge, please plug in your Booster for 60 minutes

<p style="line-height: 1;"><span style="font-size: 16px;"><br></span></p><p id="isPasted" style="line-height: 1;"><span style="font-size: 16px;"><strong>Know your Booster&apos;s charging and battery behavior with the table below:</strong></span></p><p><span style="font-size: 16px;">For a full charge, please plug in your Booster for <strong><span style="color: rgb(216, 44, 44);">60 minutes</span></strong></span></p><table style="width: 100%;"><tbody><tr><td style="text-align: center; width: 41.5473%; background-color: rgb(252, 205, 73);"><span style="font-size: 16px;"><strong>Status</strong></span></td><td style="text-align: center; width: 26.5043%; background-color: rgb(252, 205, 73);"><span style="font-size: 16px;"><strong>Mode</strong></span></td><td style="text-align: center; background-color: rgb(252, 205, 73);"><span style="font-size: 16px;"><strong>Battery</strong></span></td></tr><tr><td style="width: 41.5473%; background-color: rgb(252, 205, 73);"><div style="margin-left: 20px;"><span style="font-size: 16px;">Unplugged, with CPT</span></div></td><td style="width: 26.5043%;"><div style="margin-left: 20px;"><span style="font-size: 16px;">Always Ready</span></div></td><td><div style="margin-left: 20px;"><span style="font-size: 16px;">181 days CPT Batt Life</span></div></td></tr><tr><td style="width: 41.5473%; background-color: rgb(252, 205, 73);"><div style="margin-left: 20px;"><span style="font-size: 16px;">CPT full recharge</span></div></td><td style="width: 26.5043%;"><div style="margin-left: 20px;"><span style="font-size: 16px;">Recharger</span></div></td><td><div style="margin-left: 20px;"><span style="font-size: 16px;">Up to 8 recharges</span></div></td></tr><tr><td style="width: 41.5473%; background-color: rgb(252, 205, 73);"><div style="margin-left: 20px;"><span style="font-size: 16px;">Unplugged / Active / Linked CPT</span></div></td><td style="width: 26.5043%;"><div style="margin-left: 20px;"><span style="font-size: 16px;">Repeater</span></div></td><td><div style="margin-left: 20px;"><span style="font-size: 16px;">72 hours</span></div></td></tr></tbody></table>

Charging / Battery Life: Range-Extending Booster

The Booster works with other MeatNet™-enabled tools to seamlessly extend the range of your CPT. Each Booster or Display automatically repeats signals from other linked Combustion tools. Cradling a thermometer turns the Booster radio off. The Booster

<p><span style="font-family: Inter;"></span></p><p><span style="font-size: 16px;"><br></span></p><span style="font-size: 16px;"><img data-fr-image-pasted="true" src="https://combustion.inc/cdn/shop/files/getting-started-boosting.png?v=1702497485&amp;width=3200" class="fr-fic fr-dib"><br></span><p></p><h3 id="range-extending-mode-meatnet"><span style="font-size: 18px;">Range-extending mode (MeatNet&#x2122;)</span></h3><p><span style="font-size: 16px;">The Booster works with other MeatNet&#x2122;-enabled tools to seamlessly extend the range of your CPT. Each Booster or Display automatically repeats signals from other linked Combustion tools.</span></p><ul><li style="font-size: 16px;">Place a Booster near the Predictive Thermometer you want to boost to get a strong first hop.</li><li style="font-size: 16px;">Use that to relay the signal to (and from) the Display or App where you are monitoring + controlling your cook.</li><li style="font-size: 16px;">Or use the Display as the second &quot;node&quot; to re-boost the signal to the app.</li><li style="font-size: 16px;">Each node creates a new broadcast location with an unobstructed signal strength of about 330ft (100m).</li></ul><h3 id="charger-mode"><span style="font-size: 18px;">Charger mode</span></h3><p><span style="font-size: 16px;">Cradling a thermometer turns the Booster radio off. The Booster will spend its battery to recharge the CPT.&#xA0;</span></p><ul><li style="font-size: 16px;">When the Booster is not plugged in, press the button to determine the charge of the CPT.&#xA0;</li><li style="font-size: 16px;">When the CPT is absent, press the button to determine the charge of the Booster itself.&#xA0;</li><li style="font-size: 16px;">Placing a thermometer in the Booster will activate charger mode.&#xA0;</li></ul><h3 id="sleep-mode"><span style="font-size: 18px;">Sleep mode</span></h3><p><span style="font-size: 16px;">If a Booster can&#x2019;t find a connection, it will stop searching after 2 minutes to conserve battery. Press the button to wake it up.</span></p>

Booster Modes

Didn't find what you're looking for?

Send an email to our Customer Support team. We're here to help!

r/combustion_inc

@ChrisYoungCooks YouTube

iOS App

Android App

Shop

Support

Reddit

Combustion Inc.

Booster

Get Started with Combustion Products

How to Link All Tools (Multi-Node MeatNet™) — “Cuddle Pile!”

How It works: Predictive Thermometer

Predictive Thermometer (2nd Generation)

Specs and Tech: Predictive Thermometer (2nd Generation)

Charging / Battery Life: Predictive Thermometer

FAQ: Predictive Thermometer (2nd Generation)

Predictive Thermometer

WIFI Display

Specs and Tech: WIFI Display

Setup Guide: Range-Extending Display

Display Controls

Charging / Battery Life: Display

Display

Meet the Giant Grill Gauge

Giant Grill Gauge (GGG) Explained!

Giant Grill Gauge (GGG): Button Controls & Commands

Specs and Tech: Giant Grill Gauge

Quick FAQs: Giant Grill Gauge

Will It Fit? Fitment Guide for Giant Grill Gauge & Combustion Engine

Giant Grill Gauge (GGG)

About Combustion Inc.: Who are you people?

Predictive Thermometer: 1st vs 2nd Generation Comparison

1st Generation Display vs WiFi Display Comparison

1st Generation Booster vs WiFi Booster Comparison

Understanding WiFi Display vs WiFi Booster: Which One Do You Need?

Do I need the Display?

What’s the advantage of using the phone app?

Can I use it as an instant-read thermometer? Can I use the display like a basic kitchen timer?

How long does the battery last? (CPT & Display)

How do I clean my Predictive Thermometer?

Battery level/percentage?

Can I be a beta tester, influencer, or reviewer? Are you hiring?

Basics

Compatible Appliances

What is the max operating temperature?

Warnings and Watchouts

What if I want the internal temp near boiling? Pulled pork?!? Brisket?!?

What about the handle?

How accurate are the sensors? Are they calibrated?

Is it totally waterproof?

How does it predict when my food will be perfect?

Is the battery safe at high temperatures?

What kind of sensors are used in the thermometer?

How do I charge the thermometer?

How do I clean my Predictive Thermometer

Predictive Thermometer Basics

How does the wireless stuff work?

What’s the wireless range?

What makes our wireless setup different? Is it reliable?

What's MeatNet™? How does range-boosting work?

What’s the wireless range, really? How are you getting 1000ft?

Why Bluetooth? How’s that work?

What’s “Coded PHY”? Should I even care?

What things are bad for Bluetooth signals?

What can I do to get a better Bluetooth signal?

MeatNet: All About Wireless

Frequently Asked Questions

WiFi Not Working? The General Troubleshooting Guide

Troubleshooting Firmware Updates for Combustion Devices

Prediction missing or slow-to-predict

Not seeing surface temp

Not seeing graph

Poor range (smoker, grill, or sous vide)

Display/app stopped showing temp (while cooking)

Booster misbehaving

App not connecting/intermittent disconnects

CPT not connecting to Display and/or App

Firmware update stuck on "Updating: starting"?

Mid-update error?

Display flashing red + screeching

Turning off probe

CPT not charging?

Do I need to calibrate my Predictive Thermometer?

Display Not Charging? Try These Steps!

Troubleshooting Guide

Combustion App

Setup Guide: Combustion App

How to update firmware - CPT, Display, and Booster

Predictive Cooking with the App

Graph your cook

Virtual sensors

SafeCook™

MeatNet Cloud

Advanced mode

Debug Mode

How do I get the graphs to work?

Can I cook without the app?

What if I'm cooking "off-the-grid"?

Can I use a tablet instead?

About Firmware

Can I upgrade my firmware with someone else’s phone?

Be a Combustion Beta Tester!

Combustion App Feature: Always-On Mode

Combustion App Feature: Graph Reset Function

Firmware Rescue: Automatic Recovery for Update Issues

Combustion App: iOS Interface Improvements

Critical Bug Fixes: A More Reliable Cooking Experience

Combustion App Update History

Thermometer Firmware Update History

Booster Firmware Update History

Display Firmware Update History

MeatNet Cloud: Monitor ongoing cooks from anywhere

MeatNet Cloud: Questions

WiFi, Cloud, and Bluetooth: How it all works

MeatNet Cloud: Instructions

MeatNet Cloud + WiFi

How Combustion’s SafeCook™ determines when your food is safe

Automated food safety with SafeCook™

How to cook food that is safe and still delicious

Streamlined food safety for uncompromised taste

SafeCook™: More FAQs

References

Legal Stuff

How do I know when my food is safe to eat?

Why does SafeCook use cumulative food safety standards?

But my chicken is still pink!?

I don’t need to cook my steak that much though, right?

What about slow cooking or sous vide?

Why do I have to set a target (predict) temp with SafeCook?

Chef-Recommended Temperatures (and How SafeCook™ Makes Them Safer)

Carryover Times + Temps

Compatible Cooking Techniques

Using Your Predictive Thermometer for Sous Vide Cooking

New Low + Slow Predictions for longer cooks

How do I compensate for carryover cooking/resting?

What temperature should I cook ___ at?

Cooking Exceptions

Can I use it to reverse-sear?

Using Your CPT for Prime Rib or Turkey: Yes, You Can!

Baking Magic: Your New Secret Ingredient is... a Thermometer?

Cooking Questions

Upcoming features

Combustion Engine™ – Wireless Draft Control Fan

Combustion Engine™

Upcoming Products

If I order today, how long will it take to get it?

How much does shipping cost?

Will it ship to my country?

What about Iceland?

What about duties and taxes?

Do you have a warehouse/store in EU?

High shipping costs for international customers

Orders and Shipping

What is your return policy?

What are the terms of the warranty?

Warranty and Returns

Combustion Developer Resources

Will it work with smart appliances?

What about 3rd party apps?

Open Source and Developer Tools

Terms of service

Privacy policy

Shipping policy

Refund policy

Warranty

Crouton: Organize Recipes, Plan Meals, and Cook Smarter

Crouton Plans: Features and Benefits

Crouton