How to Link All Tools (Multi-Node MeatNet™) — “Cuddle Pile!”Updated a day ago

If you want your Combustion tools to share signals correctly and work together in a multi-node MeatNet™, you’ll need to link them. We also call this process the Cuddle Pile!

Here’s how to do it:

📋 Before You Begin

✅ Make sure the firmware is up-to-date on all devices.

(Need help updating the firmware? See our guide here.)

🔗 Linking Steps

1. Place your Thermometers inside the Boosters (this turns the Booster radio off) and turn off the Display (hold the start/stop button).
2. Bring all devices within a couple of inches of each other.
3. Remove the Thermometers from the Boosters, turn the Display back on, and set the Thermometers in the pile of devices.
4. Let them all sit together for 1–2 minutes.
5. That’s it! They’re now linked together and will relay signals from all linked Thermometers.

ℹ️ Notes

• Each Booster can be linked to up to four Thermometers.
• Yes, this works with multiple Boosters, with or without a Display.

[Related keywords: multinode, mesh, networking, local meatnet, multiple tools, bluetooth]