.png){kind=small}
Display: Button Controls & CommandsUpdated 2 days ago
The Display shows one thermometer at a time. The temp button is how you move around.
Each press of the temp button steps through the readings for the thermometer you are on: Core, then Surface, then Ambient. Keep pressing, and it carries on to the next thermometer and does the same. So every reading on every linked thermometer is reachable by pressing temp repeatedly, at any time. You do not have to wait for an alarm or hold a thermometer nearby.
To stay on the same reading but change thermometer, there is no separate shortcut on the Display: keep pressing temp until you come round to it.
Each thermometer keeps its own target temperature, so you can run a brisket and a chicken at once with different targets and different alarms. For a view of everything at once, with nicknames and photos, use the app. See Using Multiple Thermometers.
Display Controls/Commands:
start stop | Power on | |
| hold | Power off | |
| hold + m – | Reboot Display | |
time | Timer mode | |
| m – | Add minutes | |
| s + | Add seconds | |
| m – + s + | Clear timer | |
| start stop | Start countdown/up | |
temp | Cycle through Core > Surface > Ambient temps | |
| m – / s + | Set target temp | |
| m – + s + | Clear target temp | |
temp + light | Toggle °F, °C hold | |
light | ||
| hold | Adjust backlight brightness | |
| + m – | Starts cycling backlight color options. Press any key to select a color. | |
Hold light + start/stop | Factory reset | |
Hold temp + m – | Toggle tenths of a degree |
Display Legend
 | Display battery low |
 | Thermometer connected |
 | Thermometer battery low |
 | + blinking alert icon with red backlight and urgent beeping Thermometer over max temp limit! |
🎥 Watch the Display controls walkthrough here!
If a button is not doing what this page says, or the screen is not responding, email [email protected] and tell us which Display you have and what you pressed. WiFi Display: Troubleshooting Guide covers unresponsive buttons and blank screens.
[Related keywords: display controls, display buttons, buttons, commands, what do the buttons do, button guide, power on, power off, turn it off, reboot, restart, factory reset, hard reset, timer, kitchen timer, set timer, add minutes, add seconds, clear timer, countdown, set target temp, cooking to, clear target, cycle temps, switch readings, core surface ambient, switch thermometers, cycle between probes, multiple thermometers, one at a time, second probe, celsius, fahrenheit, change to celsius, switch units, metric, tenths of a degree, decimal, backlight, brightness, backlight color, change color, icons, legend, symbols, what does this icon mean, battery low, thermometer connected, over max temp, alert, red backlight, beeping]